Filtrine Split System Chillers Explained

Quality construction combined with a variety of over 60 options and the best warranty in the business, Filtrine split system chillers (one unit indoors and the other outdoors) provide consistent cooling for countless equipment and industrial process needs. Most popular for medical equipment chilling, visit the split system product page to see the medical chiller models.

For more information, please visit our website.

Filtrine Designs Each Chiller to Match the Customer's Specifications

Filtrine works with equipment manufacturers, owners or engineers to ensure the chiller will provide the most efficient and effective equipment cooling in a package that also meets the site requirements.

Filtrine's Split System Chiller Engineering Features

• Air-cooled condenser options
• Storage method of cooling with stainless steel chiller barrel and evaporator
• Coolant circulation pump sized to provide the proper flow rate and pressure
• Ambient temperature operating range from -30°F to 130°F

• Variety of cabinet options such as stainless steel for corrosive environments or low profile for tight spaces
• Epoxy coating to withstand marine climates
• Worldwide power supply options

Process chiller models are available in Closed Loop (PCP), Open Loop (POC) and One Pass (PC) configurations. For more information, see Filtrine Process Chillers Explained.

Filtrine Split-System Condenser Options at Glance

OPTIONSDESCRIPTIONMODELRemote Air Cooled CondenserThe Model AR's weather-resistant condenser in the outdoor section is installed in a remote location within 100' of the indoor section. The heat is rejected away outside vs inside. ARRemote Air Cooled Condenser/CompressorThe ARC model cuts down on noise since both the condenser and the compressor are outside and located within 200' of the indoor section which contains the evaporator, tank and pump. The indoor ARC tends to be smaller than the indoor AR.ARC

NOTE: The photo shown here is our 5 ton Split Commercial Water Chiller. Our 2 ton chiller will look slightly different with a smaller compressor.

2 Ton Split Water Chiller

5 Ton Split Water Chiller

• 24,000 BTU/hr

• 1.5' Slip Connections

• Copper Heat Exchanger (Titanium upgrade optional)

• 208 ' 240 Volts / 17.7 Amps / Single Phase

• Condenser: 27'W x 27'D x 34'H, 150 Pounds

• Evaporator: 8'W x 42'D x 24'H, 85 Pounds

• Condenser: outdoor rated / pad mount ready

• 1 Year Product Warranty

• Proudly made in the USA

• 60,000 BTU/hr

  With competitive price and timely delivery, linggong sincerely hope to be your supplier and partner.

• 1.5' Slip Connections

• Copper Heat Exchanger (Titanium upgrade optional)

• 208 ' 240 Volts / 35.6  Amps / Single Phase

• Condenser: 32'W x 32'D x 45'H, 215 Pounds

• Evaporator : 8'W x 42'D x 37'H, 100 Pounds

• Condenser: outdoor rated / pad mount ready

• 1 Year Product Warranty

• Proudly made in the USA

Our Split Commercial Water Chiller comes on a stainless steel frame. The units come with a built in flow switch to disable the chiller in the event of a pump failure. The units also come with a copper heat exchanger which is suitable for use in most applications. A titanium upgrade is optional. Copper heat exchangers aren't recommended for use in a closed loop aquarium setup because toxic levels of copper can build up in water which is being used for long periods of time. The use of titanium = Reef Tank Safe!  If your application will be negatively affected by the use of copper, we suggest our titanium upgrade option.

Pump Recommendation

• Pump Recommendation: Danner Magnetic Drive gph ' gph. Other pumps may be acceptable, however they need to be rated for less than 10psi max pressure. If you're using a pool/spa pump or any other pump rated in horsepower please talk with our tech support first, most pumps rated in HP would be capable of pressures that could damage the chiller. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our 'Accessories' web page to view our selection of pumps and accessory packages available.

Controller Notes

• Digital Controller: The controller constantly monitors your systems incoming water temperature, therefore, water flow is needed at all times in order for it to successfully read current temperatures. When your systems water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.

Penguin Chillers offers a wide variety of accessories and support equipment for our chillers.

Accessories offered:

• Water or Glycol pumps
• Quick Disconnects
• Vinyl or Silicone Tubing
• Propylene Glycol
• Pump Controller
• Accessory Packages

American owned and operated, Penguin Chillers manufactures a variety of chillers in Knoxville, TN. Purchase your chiller directly from us and we will continue offering you quality service throughout the life of your unit. If you need liquid of any sort cooled, we're here to help. Contact us at . 

Penguin Chillers current applications: 

Drag Racing '  Brewing ' Bait Tanks ' Marine & Reef Tanks ' Distilling ' Lobster Tanks ' Wineries ' Hydroponics ' Cold Therapy ' Aquaponics ' Lasers ' Research Science ' Electroplating ' Computers ' Printing Presses ' Injection Molding ' Milk/Butter/Candy/Pasta/Food Production ' Extractions ' Craft Soda ' Hyperbaric Chambers ' Waste Water Treatment ' Welding ' 3d Printing

If you want to learn more, please visit our website Split Type Chiller.