Skip to content
Sunrise Specialty » 18 Types of Plumbing and Pipe Fittings

18 Types of Plumbing and Pipe Fittings

Do you know how your plumbing works? If you don’t, here is a great insight. First, water flows into fittings such as bathtubs, showerheads, and toilet tanks. The regular or tankless water heater heats the water before it reaches the fitting.

After use, the water passes into drainpipes and delivers into a septic system. For a perfect flow, a plumbing system uses different types of plumbing and plumbing fittings. Below are some of the most common types you can find in buildings (even if it has a propane tankless heater).

Various Forms of Pipe Fittings

If you want to know the “types of plumbing and pipe fittings, here are the options in you will find in most hardware store.

1. Adaptor Fittings

 

If you have to connect different pipes for fixtures such as a tankless gas water heater, you will need to use an adapter. Adapters have male or female ends that help different pipes match.

If the ends do not have threads, you can solder or weld it with the pipe. You can even use glue to join both items.

Adapters are perfect for projects that use PVC or copper pipes. You can get this fitting in brass, PVC, and stainless steel.

2. Barb Fittings

 

This item attaches hoses to pipes. It consists of a male end, while the other part has a tapered tube. It also comes with a clamp to make it fit perfectly.

Barbs are made from plastic or brass. For cold water, you will need to use the plastic model while hot water works better with the brass barb.

3. Bushing Fittings

Next on our list of the types of plumbing and plumbing fittings is the brushing fitting. Commonly known as a reducer brushing, this item is used to connect two pipes of varying sizes. It comes with a small end that fits into a smaller pipe while its larger side goes into the bigger one.

4. Coupling

Do you want to connect two similar pipes that have the same size? You can use a coupling to perform this task. You can also use it to fix leaky or broken piping.

There are three types of couplings, which include normal, slip, and compression coupling. Each model works in different ways.

A slip fitting has a pipe that slides out of another one, thereby extending its length to fix any length of broken plumbing. But if you want to use a compression coupling, you will have to place it between two pipes. The couplings also work great when used to fix leaks with a gasket or rubber seal.

5. Cross Pipe Fitting

Unlike the previous types of plumbing and plumbing fittings, this item is cross-shaped and connects four separate pipes. Some models have three outlets and a single outlet while others have a single outlet and three inlets.

This item is tougher than most types of plastic plumbing pipes and fittings because they connect multiple pipes.

6. Double Tapped Bushing

 

This special form of nipples has an internal and external thread. Since the center hole is covered in threading, it is also called double-tapped.

You can also see this fitting as a reducer. However, it is rigid than the average one. Most double-tapped bushings have female features.

7. Elbow Fittings

This product looks like a human elbow as it has a similar bend. You can use this fitting to direct the flow of water in the plumbing. Elbows are available in 90 degrees, but you can find other models in 45 and 90 degrees.

Some elbows can connect pipes with varying sizes. Elbows are made from different materials and have internal threads.

8. Flange Fittings

This Fitting has a flat circular-shaped and it builds a strong seal for fasteners. You can use this item when working with plumbing that passes through hard surfaces like walls or ceilings.

One of the most popular items for DIY projects is the toilet flange. Also known as the closet flange, it helps lock the toilet to the floor and attaches the toilet and drain piping.

9. Mechanical Sleeve

If you want to connect two pipes with a screw, this item will help you install the fitting quickly. The fitting includes a rubber that is placed in a stainless steel clamp.

When you screw in the clamp, it uses the rubber device to create a strong seal. This fitting is slightly flexible, which means you can use it in tight areas.

10. Nipple

A nipple is a small pipe used to connect two different types of plumbing and pipe fittings. This fitting comes in different materials, which include brass, copper, and steel.

There are also different types of nipples. Some have continuous threads (closed nipples) while others have outer threads while sporting various lengths.

11. Plug and Cap

During repairs and checkups, these items are used to seal the opening of pipes. Both fittings have threads while the plug serves as the male while the cap acts as the female.

Various materials are used to build these fittings. Such materials include plastic, rubber, or metal. They can also be attached to pipes via soldering, welding, adhesives, and threading.

12. Olet Fittings

If you have a project that requires fitting in a specific size, you can use an Olet. You can also use this fitting if the inlet pipe on a T-section is larger than the outlet pipe. The most popular types of these items include the flange olet, lateral olet, and socket weld olet.

13. Reducer

This plumping item helps to reduce the diameter of a large pipe to a smaller size. Normally, there are two forms of reducers used by plumbers – the concentric and eccentric reducer.

The first one looks like a cone and is used for pipes on the same axis. Here, air might fill up space, thereby leading to the formation and collapse of bubbles.

Next is the eccentric reducer with an edge that lies parallel to the linking pipe. With this fitting, there are no bubbles.

14. Tee Fittings

As expected, this plumbing fitting has a T shape. It also has a single inlet and double outlets. Each outlet is set at right angles to the major inlet. You can also use it to drive the flow from two inlets to a single outlet.

Tee type fittings are made from various materials and come in numerous sizes. If the 3 sides have different dimensions, they are called unequal. But if you notice that all of them have similar shapes, you have an equal tee.

15. Union Fittings

Like some types of plumber and pipe fittings, this product comes with male or female threads. They even look like couplings, but they are easier to remove and replace.

A union is made up of three parts. These include the female end, the male end, and a nut that connects both ends.

16. Trap Fittings

You can find these fittings in pipes found beneath sinks in your kitchen or bathroom. They usually have a U or P shape while resembling dips on the plumbing.

A trap fitting performs two tasks. First, it stops unpleasant smells from leaking from the sink by storing drain water. It also prevents debris from blocking the drainage system.

17. Valve

With a valve, you change the direction of the water flow. The various types of fitting include throttling, isolation, and non-return.

  • Throttling valves manage the volume and pressure of the liquid. You can find these fittings placed closed to isolation valves. Due to the excess workload, they do not last for long.
  • Non-return valves permit water to flow in a single direction. Also known as check valves, they can be found in drains around your home.
  • You can use isolation valves to separate a section of your plumbing, especially if you want to make repairs. Normally, these fittings are permanently open or shut. But it is advisable that you occasionally check if they are in working condition.

18. Wye Fitting

This “Y” shaped fitting is used to attach three separate pipes. You can use Y fittings to adjust the height of the pipe. This process makes the pipe move into new supply lines or drains.

Wye reminds us of tee fittings. But they have better angles that prevent friction while allowing the water to flow gently. You can also use it to attach a horizontal drain pipe to a pipe in a vertical position.

Different Ways to Connect Plumping Fittings

You can use different ways to strengthen a pipe joint. However, your preferred method depends on the build and job you plan to carry out. Below are the various ways to attach your fittings.

Threaded fittings

To secure fittings here, you will need to twist them. Female piping and fittings have internal threads that match the male variants.

Push to Connect Fittings

If you are looking for a perfect fit for a DIY project, these items are the best options because they make installations easy. They provide excellent connections with rings and metal teeth. You can use them with pipes built from copper, PEX, and PVC.

Slip Fittings

In this connection fitting method, you need to attach the pipes and fittings with smooth surfaces. Afterward, you have to connect it with special chemicals.

Compression Fittings

Here, you can tight the joint by squeezing the pipe. The fittings include a threaded body, nut, and sleeve.

Flare fittings

This joint is used for projects that involve high water pressure and gas.

Crimp Fittings

To make this connection, you will have to fix the fitting on the pipe. Then squeeze the joint with a special tool and metal ring.

Clamp Fittings

With these fittings, you need to place the clamps around the piping after adding the fitting.

Tips for Plumping and Pipe Fitting Material

You can find plumbing fittings made from different materials such as PVC, brass, or copper. However, there are some tips you should consider.

  • Some special fittings can match two pipes made from different materials.
  • If you have a PEX piping in your home, use PEX fittings. These products are made from plastic or glass.
  • For non-hidden places like under your bathroom sink, choose fittings made from chrome-plated brass. This option will add to the elegance of your bath space.
  • Use PVC fittings for cold water supply lines as heat can damage them.

Wrap Up

A complete plumbing system has different types of plumbing and pipe fittings. These items ensure the perfect supply and disposal of water in your home.

These fittings are made from different materials while performing various functions. Some of the popular fittings in any home include adaptors, flanges, nipples, tees, wyes, and elbows.

To secure a pipe to a fitting, you need to find a suitable method. You can go for threaded fittings, where you twist the pipe with the fitting or fittings that require special tools.

If you have any questions or comments, you can place them in the comment box below. You can also share this article with your friends on social media.

7 thoughts on “18 Types of Plumbing and Pipe Fittings”

  1. “Thanks,
    A lot of information about the copper pipe and different type Pipe Fittings in and fittings pipe Your site provides very useful information. Thanks for giving this information !”

    Reply
  2. Thanks for informing me that if I have a PEX plumbing in my home, I should use a PEX fitting that is made from either plastic or glass to replace it. The owner of this previous home we recently bought had PEX for their hot and cold water systems. It needs some repairs now, so I have to look for a manufacturer of glass pipes to have it fixed. Thanks for this!

    Reply
  3. I have a question related to my kitchen faucet. Best to discuss by phone.
    Paul tel 647 203 8091

    Reply
  4. I really didn’t know some of these things before which you have shared with us through your helpful and informative article. also, I like your writing skills. keep sharing awesome stuff.

    Reply
  5. am in Ghana as a plumber I want to talk to you on WhatsApp so your number and I want you to tech me more about plumbing please .And am a student from Kumasi technical plumbing school please

    Reply
  6. This so interesting and informative post for all peoples who wants to know about the type of plumbing and pipe fittings. Thanks for sharing such great information with us.

    Reply
  7. Great content and list that everyone can follow through particularly the plumbers, thanks for sharing about it.

    Reply

Leave a Comment Cancel reply

Different Types of Pipe Fittings in Plumbing System