Plastic pellets packaging machines

Plastic pellets or resin pellets are used to manufacture plastic products and exist in granular form. Pellet sizes range from 2 to 6 mm and are usually found in a barrel, ball or disc shape. This, relatively heavy, free flowing product is an easy product to process through a plastic plastic pellets packing line. Due to its characteristics, bagging plastic pellets can be done at high speed. In addition, plastic pellets are easily distributed within bags. This results in a good bag shape which is beneficial for the palletizing as well as the stretch hooding process. Premier Tech’s portfolio offers a form, fill and seal bagging machine with tubular foil to ensure high speed bagging. In a complete plastic plastic pellets packing line, this form, fill and seal or FFS bagging machine with tubular film would commonly be accompanied by a high-level palletizer. In terms of stretch wrapping, PT would recommend its stretch hood machine to ensure full protection and stabilization of the pallet.

Bagging

Open-Mouth Baggers

OMB Series

Manual bagger with gross weigher

  • For powders, granular products, large particles and flakes
  • Weighing occurs once the product is in the bag (on the spout)
Up to 5 BPM
OML-1060-E

Compact Open-Mouth Bagging System

  • For powders, granular products, large particles and flakes
  • Handles polywoven, paper and polyethylene bags
Up to 8 BPM
OMS Series

Manual bagger with nett weigher

  • For powders, granular products, large particles and flakes
  • The product is weighed before it is released into the bag, for greater accuracy and speed
Up to 20 BPM
OML-1140-E

High-speed open-mouth bagging machine

  • For powders, granular products, large particles and flakes
  • Handles paper, plastic and polywoven bags
Up to 25 BPM

Valve Bag Fillers

Integrated valve bag packer

  • Operating system used to control and monitor an entire bagging system through a single HMI
ENCOMPASS

Valve bag filling machine

  • Enclosed valve bag filler minimizes dust emission
Up to 8 BPM
Air Packer

Valve bag filler (Force flow)

  • For fine powders, flakes, pellets and granules with a particle size of 3/8” and finer
  • Handles all types of valve bags
Up to 10 BPM

Form Fill and Seal Baggers (FFS)

VFFS Series

Vertical form, fill and seal bagging machine

  • For granular products, large particles and fibrous products
  • Uses rolls of flat polyethylene film to make its own bags
Up to 30 BPM
FST Series

Tubular FFS bagging machine

  • For powders, granular products, large particles and flakes
  • Uses tubular film rolls of polyethylene to make its own bags
Up to 33 BPM

Manual Baggers

OMB Series

Manual bagger with gross weigher

  • For powders, granular products, large particles and flakes
  • Weighing occurs once the product is in the bag (on the spout)
Up to 5 BPM
OMS Series

Manual bagger with nett weigher

  • For powders, granular products, large particles and flakes
  • The product is weighed before it is released into the bag, for greater accuracy and speed
Up to 20 BPM

FIBC Baggers

FBL Series

Hygienic Bulk Bag filling machine

  • Bags large quantities of powders, flakes and granular products in bulk bags (500 to 1500 kg)
Up to 40 BPH

Palletising

RPL Series

Robot Palletiser for bags

  • For bags and bales
  • Wide selection of end-of-arm tools meets virtually all palletizing needs
Up to 30 BPM
APC Series

High level gripper head palletiser

  • For bags and bales
  • Combines robotic and traditional palletising technology
Up to 40 BPM

Load Securing

LSH-0060-E

Stretch Hooder

  • Low cost pallet wrapping solution quickly applies a plastic stretch hood to pallet loads
Up to 60 LPH
LSH-0100-E

Stretch Hooder Machine

  • Medium production pallet wrapping solution quickly applies a plastic stretch hood to pallet loads
Up to 100 LPH
LSH-0200-E

Pallet Hooder

  • Fully equipped pallet wrapping solution quickly applies a plastic stretch hood to pallet loads
Up to 200 LPH