• MEGA-The leading creators of blowing machine and mold in China.

MG-SS Series Automatic Blow Molding machines

Brief Introduction

Mega Machinerys’ SS Series automatic linear PET blow moulding machines was designed with two principles in mind. One, to lower the running cost for the bottle producer and two, provide easy operation. The MG-SS Series PET blow moulding machines lowers your production costs so you can achieve maximum profits in your competitive bottling market, the MG-SS series blower reduces your energy expenses by up to 30% at a maximum output of 1500BPH for the signal cavity machine. Thanks to our GM Mr. Cai Yunsen who developed the patented process for spacing the performs which maximizes the performance of the MG-SS series PET blow moulding machine.

Overview

* PLC controller
MG-SS series PET blow moulding machines adopts the famous Delta controller system. It integrates a self-diagnosis program, all warning information is shown through the friendly touch interface featuring an alarm system. Also, the controller shows the actual blowing speed during production.

* Cast molded platen with toggle clamping unit
Cast molded platens offer the longest service life, and enhance the stability of the machine. Engineering software analyzed and optimized the clamping system to guaranty the fastest possible moving speed and strongest clamping force. Also an additional high pressure compensation system is standard equipment and ensures the perfect clamping result.

* Infrared heating system
A Zoned and layered heating system with an advanced venting unit keeps the temperature accurate and uniform, this is the key to manufacturing high quality plastic bottles. The lamps can also be adjusted horizontally and vertically inside the specially designed heating oven. This ensures the distribution of heat meets the different shapes of the preforms.

* Stretching system
A double cylinder stretching unit is standard equipment and ensures the fastest possible stretching speed, and the longest possible stretching stroke. Linear motion guides provide ultra smooth movement and the lowest possible friction coefficient.

* Patented perform spacing system
The patented perform spacing system sets the preform adapters 120mm apart at the blowing station by mechanical function and also improves the moving speed.

* Preform loading & bottle discharging system
Famous brand pneumatic parts guarantee the machines reliable performance and long service life while Linear motion guides improve the moving speed. Special grip units are designed to be changed easily.

Features

1. Full automatic running with theoretical output capacity up to 4500 bottles per hour for 0.1L volume using four-cavity blow mold
2. Patented loading system carries the preform automatically with less moving parts.
3. Suitable to produce 0.1 ~ 2.5L Standard neck PET container
4. Advanced PLC control system with a use-friendly control panel
5. Built-in memory of the PLC saves all the sets of numbers required to produce different size bottles.
6. Multiple Reliable sensor systems monitors the machine’s automatic function
7. Equipped with special designed air storage unit
8. Powerful heating unit with precision controller and convenient adjusting mechanism.
9. Cooling system that provides a perfect cooling result
10. Compact design that saves space
11. Simple installation & startup operation
12. minimal transfer space for the air distribution system.

Bottle SamplesPET bottles produced by SS series automatic reheat PET stretch blow molding machine:

CSD 3L

PET Jar-5L

Detergen 500ml PET bottle

pharmacal 50ml

Edible oil 4500ML

water bottle 1L

Specification

General Information MG-SS2BF MG-SS3BF MG-SS4SF MG-SS4BF
Clamping Force 35T 35T 35T 60T
Clamping Stroke 130mm 130mm 90mm 130mm
Max. Stretching Stroke 400mm 400mm 320mm 400mm
Bottom Moving Stroke 70mm 70mm 70mm 70mm
Number of Cavities 2 cavity 3 cavity 4 cavity 4 cavity
Theoretical Output 3000BPH 4000BPH 5200BPH 4500BPH
Max. Mould Thickness 300mm 300mm 200mm 310mm
Electrical System
Voltage Standard 380v/3PH/50Hz or special order
Number of Heating Zone 2 Sections 3 Sections 4Sections 4Sections
Total Power (Full Loaded) 35KW 48KW 48KW 48KW
Container
Max. Container Volume 2.5L 2.5L 0.75L 2.25L
Neck Diameter Range 32mm 32mm 32mm 32mm
Max. Container Diameter 110mm 110mm 73mm 110mm
Max. Container Height 350mm 350mm 220mm 360mm
Air system
Low Air consumption 8-10Bar 8-10Bar 8-10Bar 8-10Bar
High Air consumption ≤35 Bar ≤35 Bar ≤35 Bar ≤35 Bar
Dimension & Weight
Blow molding machine 3.37x2x2.2 m 2.95×2.25×2.2m 3.65×1.9×2.2m 3.66×2.16x2m
Preform Autoloader 2.1×1.3×2.55m 2.4×1.4xx2.7m 2.5×1.6×2.7m 2.4×1.4×2.7m
Net Weight 3T 4T 4T 4.5T
General Information MG-SS6SFT MG-SS6SF MG-SS6MFT MG-SS6MF
Clamping Force 70T 45T 70T 75T
Clamping Stroke 90mm 90mm 120mm 110mm
Max. Stretching Stroke 320mm 320mm 350mm 350mm
Bottom Moving Stroke 70mm 70mm 70mm 70mm
Number of Cavities 6 cavity 6 cavity 6 cavity 6 cavity
Theoretical Output 7000 BPH 9000BPH 6700 BPH 8200BPH
Max. Mould Thickness 200mm 200mm 320mm 250mm
Electrical System
Voltage Standard 380v/3PH/50Hz or special order
Number of Heating Zone 4 Sections 6 Sections 4 Sections 8 Sections
Total Power (Full Loaded) 64 KW 90KW 96 KW 120kw
Container
Max. Container Volume 0.75L 0.75L 1.5L 1.5L
Neck Diameter Range 32mm 32mm 32mm 38mm
Max. Container Diameter 70mm 70mm 85mm 105mm
Max. Container Height 220mm 220mm 320mm 280mm
Air system
Low Air consumption 8-10Bar 8-10Bar 8-10Bar 8-10Bar
High Air consumption 30-35 Bar 30-35 Bar 30-35 Bar 30-35 Bar
Dimension & Weight
Blow molding machine 3.8x2x2.2m 4.9×2.2×2.3m 4.6×2.25×2.2m 4.9×2.2×2.3m
Preform Autoloader 3.4×1.6×3.3m 2.5×1.8×2.7m 3.4×1.6×3.3m 2.5×1.8×2.7m
Net Weight 7T 8T 8T 9T
General Information MG-SS6BFT MG-SS6BF MG-SS8SF MG-SS10SF MG-SS12SF
Clamping Force 70T 45T 45T 75T 90T
Clamping Stroke 130mm 130mm 90mm 90mm 110mm
Max. Stretching Stroke 350mm 370mm 320mm 320mm 350mm
Bottom Moving Stroke 70mm 70mm 70mm 70mm 70mm
Number of Cavities 6 cavity 6 cavity 8 cavity 10 cavity 12 Cavity
Theoretical Output 6500 BPH 8000BPH 12000BPH 14000BPH 16000 BPH
Max. Mould Thickness 320mm 250mm 200mm 200mm 200mm
Electrical System
Voltage Standard 380v/3PH/50Hz or special order
Number of Heating Zone 4 Sections 8 Sections 6 Sections 10 Sections 12 Sections
Total Power (Full Loaded) 96 KW 120kw 100KW 150KW 170KW
Container
Max. Container Volume 2.5L 2.5L 0.75L 0.75L 0.75L
Neck Diameter Range 32mm 38mm 32mm 32mm 32mm
Max. Container Diameter 110 mm 85mm 70mm 70mm 70mm
Max. Container Height 360mm 350mm 220mm 220mm 280mm
Air system
Low Air consumption 8-10Bar 8-10Bar 8-10Bar 8-10Bar 8-10Bar
High Air consumption 30-35 Bar 30-35 Bar 30-35 Bar 30-35 Bar 30-35 Bar
Dimension & Weight
Blow molding machine 5.6×2.25×2.2m 5.6×2.1×2.3m 5.4X2.1X2.3m 6.4×2.1×2.3m _ _
Preform Autoloader 3.4×1.6×3.3m 2.5×1.8×2.7m 2.5×1.8×2.7m 2.5×1.8×2.7m _ _
Net Weight 8T 9T 9T 10T _ _

Mega Machinery, the Professional PET Blow Moulding Machine supplier in China.

Note: PET stretch blow molding machine is also known as Reheat stretch blow molding machines, Stretch blow molding machines, bottle blowing machine, blowing machines and PET blow molding machine.

Bottle Automatic Blow Molding Machine